PCQI Insights

Preventive Controls Validation Evidence and PCQI Review for Walmart Suppliers

Quick answer: under 21 CFR 117.160, preventive controls must be validated by, or under the oversight of, a PCQI, unless 117.160(c) excludes them. The validation must rest on scientific and technical evidence. For Walmart suppliers, that evidence shows a written limit really controls the hazard.

Preventive controls validation evidence and PCQI review banner - PCQI Services

Preventive controls validation evidence is what turns a written process limit into a defensible one. A limit is only as useful as the proof that it controls the intended hazard. When that proof is weak, process changes and deviations become much harder to evaluate.

Walmart may have its own supplier programs and expectations. These depend on the product, the facility, the commercial relationship and current law. So confirm any Walmart-specific requirement with the relevant Walmart contact before you treat a practice here as a Walmart rule. For the wider preparation steps, see our Walmart food supplier preparation guide.

Five Steps to Review Preventive Controls Validation Evidence

1. Identify the controls that need validation

Start with the food safety plan. Review the hazards requiring a preventive control and the controls you chose under 21 CFR 117.135. First, confirm that Part 117 Subpart C applies. Some facilities are exempt from subparts C and G, such as qualified facilities under 21 CFR 117.5(a) or dietary supplement operations that comply with Part 111 under 117.5(e). For them, these PCQI duties may not apply.

Not every control carries the same duty. Under 21 CFR 117.160(c), you do not need to validate food allergen controls, sanitation controls, the recall plan or the supply-chain program. Other controls can also be excluded, but only if the PCQI prepares, or oversees, a written justification.

2. Check the scientific basis

Validation must include obtaining and evaluating scientific and technical evidence. When that evidence is not available or is inadequate, the rule calls for studies instead. Sources can include published technical evidence, process authority work or facility-specific studies, as fits the process and hazard.

Be careful with borrowed evidence. A study for a different product or equipment setup may not justify your current operating limits.

3. Verify that validated parameters are in use

Next, connect the evidence to daily practice. Link it to procedures, equipment settings, calibration, monitoring records and operator training.

Then check whether routine production stays within the supported conditions. Verification under 21 CFR 117.165 helps here, through calibration, testing and record review.

Keeping Validation Evidence Current

4. Document PCQI oversight

Under 21 CFR 117.180(a), a PCQI must do or oversee the validation of preventive controls. Keep evidence of who prepared or oversaw the work, review dates and technical decisions.

In addition, identify the approved version of the plan and its reanalysis history. Timing matters too. Validation normally happens before the plan is implemented. Where needed to show the controls work as designed, it can follow within 90 calendar days after production of the food first begins, or later with a written PCQI justification.

5. Reassess after changes and deviations

Validation is not a one-time file. Under 117.160(b)(1), you must validate again whenever a change to a control measure could affect whether it controls the hazard, and whenever a reanalysis shows the need. So watch formulation, packaging, equipment, supplier and performance changes. For specialist help, see our validation study review service.

Finally, keep the two processes apart. Walmart supplier acceptance is a separate process, and it should not be inferred from FDA validation evidence.

Preventive Controls Validation Evidence Checklist

✓ Identify the controls that require validation and document any 117.160(c) exclusions.
✓ Check the scientific basis for each critical limit or parameter.
✓ Verify that validated parameters are used in routine production.
✓ Document PCQI preparation or oversight, dates and technical decisions.
✓ Revalidate after changes to control measures, deviations or reanalysis findings.
✓ Verify the applicable Walmart supplier program and all relevant product and facility requirements.
✓ Assign owners for documentation, follow-up actions and periodic review.

Frequently Asked Questions

Do sanitation and allergen controls need validation?

No. Under 21 CFR 117.160(c), food allergen controls, sanitation controls, the recall plan and the supply-chain program do not need validation. They still need monitoring and verification where appropriate.

Can we rely on a published study?

Often, yes, if it matches your product, process and equipment. If it was done under different conditions, it may not support your current limits.

Does FDA validation evidence guarantee Walmart acceptance?

No. Supplier acceptance is a separate commercial process. Confirm Walmart-specific requirements directly with the relevant Walmart contact.

Official References

21 CFR Part 117 (eCFR)
FDA: FSMA Final Rule for Preventive Controls for Human Food
Walmart: Supplier Requirements

PCQI Insights

Related Reading

Need Help Managing Your PCQI Responsibilities?

Talk with our team about validation evidence, monitoring and PCQI review gaps in your food safety plan.

Request a Free Consultation

Independent educational content. PCQI Services is not affiliated with or endorsed by Walmart Inc. or the U.S. Food and Drug Administration (FDA). Walmart-specific supplier requirements must be confirmed directly with the relevant Walmart contact. Meeting FDA requirements or working with PCQI Services does not guarantee supplier acceptance. Regulatory applicability depends on the product, facility, activity and current law. Read our terms.

Scroll to Top